Antminer s7 прошивка

I rebooted one the Antminers, the trigger was activated, and the Zabbix dashboard showed the problem. When the Antminer came back online, the dashboard went green antminer. The graph of hashing power shows the problem also. The majority of the Zabbix monitoring system прошивка working well. My current setup has some problems, though.

MinToRRo Bitmain Antminer Firmware S5 / S7- The Flash one!

Once Antminer set up the main and proxy Zabbix servers, I can monitor other locations as well. One of прошивка things I noticed was that most of our customers did not have network monitoring set up and working on their systems, and the ones that did usually had it done as a service by another company, or had a network guru onsite that really understood it.

Also published on Medium.

antminer s7 прошивка

AltcoinBitcoinMiningZenCash. Robert August 12, How much for your прошивка Rolf August 12, 8: I should do a blog post with an update on where Antminer am at now with this monitoring system. The problem I had is that I would have to log into the mining pool every day to make sure all my devices were working properly. So I set up a system that would monitor the main features and alert me if there was a problem: Makes sure the antminer usb cgminer прошивка Alive, checks my username is still the username, and checks the pool name is still the pool name I set up.

This alerts me if any of this information changes. If the Antminer S9 rate drops below 12, or the S7 below antminer, it lets antminer know. It tracks S7 temperature and graphs it. Still working on doing this for S9. I asked Bitmain to look into the API setting and fix it on the next software update. Same thing with site internet. I split the system so the main server is running in the cloud at Amazon Web Services, and a proxy server is running at each of my locations, gathering data and uploading it. This lets me check status anytime on my phone or any computer where I can log into a browser. I get emails if there is a problem. The system does not let me make any changes to any of the devices.

It is a passive monitoring system only. For changes, I either use the web interface or use a custom script that logs into each device and makes the changes I want. If you are interested in having these capabilities for your system, what I can do is: Assist you in setting up this type of system for your own environment. We could scope the project and price. There isnt a power jack, so you have to solder a supply line on to the board. Dont use a new barrel jack, because there is something in the way of it on the daughterboard, and if the BBB barrel is there it wont fit back together. Presumably you could stick one on the backside, but ehhh 22 Ga solid copper wires are fine.

To know where to attach, look at the BBB board face, there is a largish rectangle on прошивка board print, next to the pwr LED. Thats the BBB power input normally where antminer jack goes. Run a red wire to the gold oval hole inner most, and a black to the one outermost near the ethernet jack opening side. Msi rx 570 armor 4g oc майнинг least it doesnt have a current or open circuit ohms to the other two pins.

Now solder them in. Also to note, the BBB has a power management chip, but is being fed 5V by the daughterboard, which in antminer t9 настройка gets it from the blades. Normally, the pins on the BBB header have voltage on them to power capes. But apparently прошивка thats where the BBB is drawing power.

I was amazed that the header was used as power. Its like in through the out door.

antminer s7 прошивка

Anyway so your source should be 5. Normally the input can be V but we dont have the schematics for this board so just use a well regulated 5V off a voltage regulator, supply, or 5V USB line spliced out and destroyed for this purpose.

antminer s7 прошивка

Now does the pwr LED light up? Too bad, so sad; your dad. Unfortunately you can only see that sad fact by pulling it apart from the unit, unless you are a dentist with a good tiny mirror to see up into the crack. C is not going to help you. If not, declare dead, go to D for the new board setup. Try to fix via debug pins, serial and terminal. This section is informational only.

Antminer S7 Failed Firmware Update

It presumes you had all the BBB LEDs on, that you can now see, cause the thing is flipped over прошивка its original mount. Ours tried and failed this step so this set of steps on a linux box never got somewhere productive, but you might be in this camp. I share because I care. Now try to communicate with the semi-live board via serial TTL debug pins. Because so much other component stuff is gone, thats antminer only antminer you have. We attempted to use an FTDI to serial debug pin adapter board to communicate with it. Antminer one for 8 bucks. Install the drivers on the PC. Most of the generic ones прошивка Arduino work, but when attaching you must be sure to orient the ground pin to the one closest to the ethernet jack, sometimes labeled J1.

It can physically fit either way but we want it right. The pins are symmetric 0. Lay the BBB ethernet jack to the right and look down at it. Thats the right way. In our example the BBB pins are 1, 4, 5 active. The others are unwired. Pin 1 is J1. Its opposite, not identical. You might even have little information flow arrows as guides on your board. And probably if you boot with TX and RX wrong, you just wont get a terminal. Move along, nothing else to see here. Make sure your adapter board is switched to 3. Run the USB line to the computer. Прошивка adapter board should прошивка light up and tell you antminer ready as a USB serial adapter device, but this isnt enough juice настроить antminer s7 power the BBB which as we remember from our last mutual annoyance is a greater 5V.

Do you have a serial device listed? Try to connect from the computer via command line. It прошивка work on PC I dont know. Maybe wait if it goes to no cursor, cause your board is booting off a card. If the terminal hangs, or hangs up, check the Tx and Rx lines. They may be reversed. Switch and boot again. If you get a terminal, congratulations, you can now прошивка your awesome linux shell skills to mole around in there and fix antminer issue.

Sorry, I have no idea what the problem antminer with your board.

Antminer S9 Monitoring and Alerting Application – Block Operations

So i have my things to прошивка now. My machines works without issues. My watts dropped more than work! Thanks and good luck for others if problems! Special thanks for Fubly! This is something and works as i need it. Powered by SMF 1. February 04, Ondart Member Offline Activity: July 09,прошивка July 10, July antminer, July 19, July 22, July 26,antminer Xircom Legendary Offline Activity:

Похожие статьи:

  • Antminer bitcoin u2
  • Ремонт antminer
  • Antminer s7 купить в москве сейчас
  • Gtx 1070 gaming x 8g потребление
  • Bitmain antminer s9
  • Bitcoin miner asic antminer s1

  • Рекомендуем почитать:

  • сайт antminer отзывы
  • - 2018 (c)