Double check that your PSU is good antminer, make sure the power cord to your PSU is good, and the probable cause for a antminer device is thermal paste and thermal paste oil shorting out circuits on your boards. When I add a troubleshooting section to setup tutorial, I will add more details.
The setup thing is -- clean up that thermal paste and make sure you have a good PSU. Be careful when cleaning! Now, double check that you are connecting to one of your pools. The numbers shown here are pretty standard after 13 hours of operation. Double check that your worker is hashing as expected. Remember to set your worker difficulty correctly.
If you set the difficulty wrong, you can get very volatile hash rates reported at your pool. Time to change the IP address.
You will want to be careful with this one, as it could be difficult if you use an invalid IP address for your network. My recommendation is to find an IP address range that is not in use, but on your same main IP address range. For example, if your network has IP addresses at Change the value in the textbox circled in blue below.
Double check your settings. Once you are convinced it is correct, it is time to reboot the device. Go to the System Tab then click Reboot top right. It can take seconds for everything to be back up and running again, assuming you set setup IP address correctly Before you do anything else, write the IP address down and take it to the device. Remember, we were all newbies once. No mining pool referral links. Antminer mining contract referral links. No referral links, period.
No Promoting New Alt Coins. Asic antminer что это такое there is a new alt coin out, this is not the place to discuss or promote it. If you have questions about mining that alt coin, feel free to ask away!
Nobody should have to trust you before clicking on a link. URL-shortener services serve no use on Reddit as there is nothing restricting the size of your comment string. Do not ask for other setup to mine for your address. Antminer not beg for donations simply for lending a helping hand. Anybody caught violating the rules will be banned on sight.
If you notice somebody abusing the subreddit rules, please message the moderators with the permalink in question. All members of the BitcoinMining subreddit are expected to read and follow the Official Reddit Rules as well as the informal Reddiquette guidelines. Likewise, all moderators of this subreddit do follow the Modiquette. Comparison of all mining pools on the official Bitcoin wiki. Plug in an ethernet cable from the AntMiner setup you router. Power on as above. If not then change it to 2, this is just temporary. This step will allow the S1 to accept an assigned IP address as controlled by your router. Navigate to your router and look up antminer of clients. Find the IP the AntMiner has now been assigned and navigate to that.
It may work within a small range without one.
Click save and apply. You can then change your router subnet back to whatever you are used to using. Unplug your computer from all internet sources. Plug in an ethernet cable from the AntMiner to your computer. Click on "Internet Protocol Version 4" and click properties.
Select "Use the following IP address" and enter the following: Restart the configuration instructions as above. Make sure both are connected to the 2nd blade If its power on, then the problem is for sure in your PSU. Please go get a brand name reliable PSU.
Depends on your PSU Model, it may fix your looped auto-shutoff http: Please look at the above photo. It will show you the pinout information. There are several different shapes of connectors and power specifications.